MNP QR Code 

Instructons for TMCC O Scale MNP Track Cleaning Cars using T

The Electric Railroad Co. Mini Commander HC-V2

MINI-Commander HC-V2

Order Sequence for MNP Inc. TMCC Operation Modes

_______________________________________________________________ 

Install pin on pin 1&2 (Configuure/Run Sw) (See picture)

Car on track

Power up track, full voltage

ACC 1 Set 5X ( to get into configure mode)

ACC # Set ( in my case 74)

AUX 1 16 Boost

Power off

Remove pin

Wait 10 seconds

Power track

CAB ACC 74 AUX 1

Turn cab on (Both Motors should run!!)

Next Install the the box on the car. 

Download the Complete Instructions from the Electric Railroad Co. 

Click on the logo below:

[ Home ] [ Up ]

Send mail to [email protected] with questions or comments about this web site.
Last modified: October 14, 2013